home *** CD-ROM | disk | FTP | other *** search
- Path: nntp.teleport.com!usenet
- From: curt@teleport.com (Curt...)
- Newsgroups: comp.dcom.modems
- Subject: Re: New USR 28.8 problem
- Date: Wed, 24 Jan 1996 05:48:46 GMT
- Organization: Teleport - Portland's Public Access (503) 220-1016
- Message-ID: <3105c73d.10428656@news.teleport.com>
- References: <4dugno$gen@news.cais.com> <4dune6$fm5@cloner2.ix.netcom.com>
- NNTP-Posting-Host: ip-pdx11-62.teleport.com
- X-Newsreader: Forte Agent .99c/16.141
-
- > eagleray@ahoynet.com (Kevin Burchett) wrote:
-
- > >I just got a new USR 28.8 v.34 sportser external modem and I can't
- > >seem to get it configured. I have an internal sound/fax/modem 14.4
- > >that came with this NEC 7020. I got the new modem plugged into serial
- > >port one. The old modem is still in the machine because I need the
- > >sound part of it. I followed the installation instructions(I thought),
- > >but whenever I try to logg on to my ISP with the new modem in Trumpet
- > >2.0b i get a modem not responding message.
-
- > >Do I need to take the old modem out and somehow disable it, I put the
- > >new modem on comm 1 and the old modem is on comm 2 so I thought there
- > >would be no conflicts. But I am still stumped. I am new to this so
- > >that's why I probably sound stupid. Any advice any one can give would
- > >be greatly appreciated.
-
-
- Frank,
-
- I'm curious where your mouse is? If its a PS/2 or bus mouse, may be ok...
- but if its a serial mouse plugged into an external serial port, then you
- could have it in conflict with the internal modem. Another thought---even
- without a mouse, make sure you have disabled any physical serial
- port you have which conflicts with the internal modem.
-
- Best of luck,
- Curt...
-
-
- _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
- Curt's High Speed Modem Page:
- http://www.teleport.com/~curt/modems.html
- _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/
-